RichardB Posted September 30, 2009 Share Posted September 30, 2009 No, not the wife, the boiler - the one that does the heating, the hot water, not air, the one that means I don't need to take a cold water shower at 5:30 am. Anyway, despite a 8am-1pm appointment it got sorted at 5:40pm when the engineer showed up and blew some compressed air over everything at random. Least I can "remove the barnacles" tomorrow morning in comfort. Link to comment Share on other sites More sharing options...
DaveH Posted October 1, 2009 Share Posted October 1, 2009 No, not the wife, the boiler - the one that does the heating, the hot water, not air, the one that means I don't need to take a cold water shower at 5:30 am. Anyway, despite a 8am-1pm appointment it got sorted at 5:40pm when the engineer showed up and blew some compressed air over everything at random. Least I can "remove the barnacles" tomorrow morning in comfort. Ey Up Richard, Why is YOUR post (you had to have your boiler repaired) appearing with MY avitar (Vulcan) to the left but with your details (nearly 11,000 posts) Is it another "quirk of the system" or have you "borrowed" my identity? Must admit that I "borrowed" that picture from elsewhere (very naughty of me). I chose Vulcan because it was very Sheffield and of course it was also the editorial column on page 6 of THE STAR for many years, - how many "posts" were made there? Looking back I wish now I had chosen "VULCAN" or "EY NARDEN" as a username as well because DaveH is too easy to trace and people are trying to find out just a bit too much about me. Dare I mention the Parkwood Springs thread? :o Link to comment Share on other sites More sharing options...
DaveH Posted October 1, 2009 Share Posted October 1, 2009 Ey Up Richard, Why is YOUR post (you had to have your boiler repaired) appearing with MY avitar (Vulcan) to the left but with your details (nearly 11,000 posts) Is it another "quirk of the system" or have you "borrowed" my identity? Must admit that I "borrowed" that picture from elsewhere (very naughty of me). I chose Vulcan because it was very Sheffield and of course it was also the editorial column on page 6 of THE STAR for many years, - how many "posts" were made there? Looking back I wish now I had chosen "VULCAN" or "EY NARDEN" as a username as well because DaveH is too easy to trace and people are trying to find out just a bit too much about me. Dare I mention the Parkwood Springs thread? Stuart reports avitars displaying normally on his computer but on mine ALL Richards posts appear with my avitar, - very strange Perhaps we could rename the thread from "trouble with the boiler" to "trouble with the avitar" lol Link to comment Share on other sites More sharing options...
RichardB Posted October 1, 2009 Author Share Posted October 1, 2009 Stuart reports avitars displaying normally on his computer but on mine ALL Richards posts appear with my avitar, - very strange Perhaps we could rename the thread from "trouble with the boiler" to "trouble with the avitar" Indeed, all avatars are looking fine and correct here at home (both laptops = not tried the third); I'd like to call for a server reboot as a matter of course. Link to comment Share on other sites More sharing options...
Stuart0742 Posted October 2, 2009 Share Posted October 2, 2009 Indeed, all avatars are looking fine and correct here at home (both laptops = not tried the third); I'd like to call for a server reboot as a matter of course. Yes I agree, every day there seems to be some strange happening Daveh see the wrong avataors Ukelele Lady losing posts Richardb having posing problems and so on Link to comment Share on other sites More sharing options...
RichardB Posted October 2, 2009 Author Share Posted October 2, 2009 Richardb having posing problems and so on Listen Pal, I've never had posing problems - it's the weekend and time for the Taffetta ballgown and tiara again, this time set off with a smelly pair of sturdy boots because I'm off to a local farm to collect a vehicle full of steaming "horse-remnants" :rolleyes: Link to comment Share on other sites More sharing options...
DaveH Posted October 3, 2009 Share Posted October 3, 2009 Stuart reports avitars displaying normally on his computer but on mine ALL Richards posts appear with my avitar, - very strange Perhaps we could rename the thread from "trouble with the boiler" to "trouble with the avitar" Didn't have time to go omline last night but today all seems fine again, - all avitars present and correct. Strange how these things happen. Link to comment Share on other sites More sharing options...
Stuart0742 Posted October 3, 2009 Share Posted October 3, 2009 Didn't have time to go omline last night but today all seems fine again, - all avitars present and correct. Strange how these things happen. Is Richard still having posing problems Link to comment Share on other sites More sharing options...
DaveH Posted October 3, 2009 Share Posted October 3, 2009 Is Richard still having posing problems Don't know, he hasn't said, - think he's gone out in his taffeta ballgown and tiarra lol Link to comment Share on other sites More sharing options...
DaveH Posted October 11, 2009 Share Posted October 11, 2009 No, not the wife, the boiler - the one that does the heating, the hot water, not air, the one that means I don't need to take a cold water shower at 5:30 am. Anyway, despite a 8am-1pm appointment it got sorted at 5:40pm when the engineer showed up and blew some compressed air over everything at random. Least I can "remove the barnacles" tomorrow morning in comfort. So back to your boiler I don't have central heating being "all electric" so I don't have all these boiler problems unless the thing starts leaking or the electric immersion heater burns itself out. Now going back a few years to mt Sheffield Steam club days as safety officer at the traction engine rally. Have you got a current boiler test certificate? Are you hydraulic tested up to 400psi? What is your gauge red lined at for maximum working pressure? Are the mudhole and inspection doors sealed with asbestos or synthetic gaskets. Is the water gauge fitted with safety protectors in case you catch it with a shovel while stoking the firebox? Are the firebox stays intact and sound? Are the tubes liable to leak at working temperature and pressure? Compared with this lot domestic boilers must be a piece of cake to service. Link to comment Share on other sites More sharing options...
RichardB Posted October 11, 2009 Author Share Posted October 11, 2009 Are the mudhole and inspection doors sealed with asbestos or synthetic gaskets. Is the water gauge fitted with safety protectors in case you catch it with a shovel while stoking the firebox? This all sounds too personal for SheffiedHistory :rolleyes: Link to comment Share on other sites More sharing options...
DaveH Posted October 11, 2009 Share Posted October 11, 2009 This all sounds too personal for SheffiedHistory I suppose it does but steam engine men will know what I am on about. ;-) Link to comment Share on other sites More sharing options...
RichardB Posted October 11, 2009 Author Share Posted October 11, 2009 I suppose it does but steam engine men will know what I am on about. I appreciate your expertise in an area I cannot claim to have any knowledge of. Just having a laugh :) Link to comment Share on other sites More sharing options...
DaveH Posted October 12, 2009 Share Posted October 12, 2009 I appreciate your expertise in an area I cannot claim to have any knowledge of. Just having a laugh All in all Richard, boilers are all a load of hassle in the long run. Inefficient, high maintainance and usually expensive to repair or replace. :( Link to comment Share on other sites More sharing options...
SteveHB Posted October 12, 2009 Share Posted October 12, 2009 Looking at this topic keeps reminding me of a pub that was in my area, 'The Boilers' is now long gone, but that wasn't the real name of the PH. I know the answer and also how it came to be known by it's nick-name, does anyone else? Link to comment Share on other sites More sharing options...
DaveH Posted October 12, 2009 Share Posted October 12, 2009 Looking at this topic keeps reminding me of a pub that was in my area, 'The Boilers' is now long gone, but that wasn't the real name of the PH. I know the answer and also how it came to be known by it's nick-name, does anyone else? Don't know where it was or what its real name is / was But was it called "the boiler" after a particularly sadistic landlady :o Link to comment Share on other sites More sharing options...
SteveHB Posted October 12, 2009 Share Posted October 12, 2009 Don't know where it was or what its real name is / was But was it called "the boiler" after a particularly sadistic landlady No ! nothing to do with an 'old' 'Boiler' at all .. This one fell off a waggon / lorry. Link to comment Share on other sites More sharing options...
SteveHB Posted October 13, 2009 Share Posted October 13, 2009 The PH was called The Sportsman and it stood at the top of Oak St, on the corner of Well Rd. Known locally as The Boilers, it got the name around 1896 after a large boiler fell from a cart that was transporting it up Gleadless Rd. The boiler rolled down Well Rd and embedded itself in the wall of the pub. Crop from O/S map #21 Link to comment Share on other sites More sharing options...
DaveH Posted October 13, 2009 Share Posted October 13, 2009 The PH was called The Sportsman and it stood at the top of Oak St, on the corner of Well Rd. Known locally as The Boilers, it got the name around 1896 after a large boiler fell from a cart that was transporting it up Gleadless Rd. The boiler rolled down Well Rd and embedded itself in the wall of the pub. Crop from O/S map #21 Not heard that one before Steve, but as boilers are usually cylindrical as this shape is best to contain and withstand high internal pressure it would certainly roll down a hill well. Link to comment Share on other sites More sharing options...
RichardB Posted October 13, 2009 Author Share Posted October 13, 2009 Not heard that one before Steve, but as boilers are usually cylindrical as this shape is best to contain and withstand high internal pressure it would certainly roll down a hill well. The SheffieldHistory "Rolling a big Boiler downa Big Hill into a Pub Challenge" is hereby launched. The boiler must be of a standard size and weight, what are the nominations for Pub/Hill please ? Obviously the bigger and steeper the hill the better. This being a history site the Pub need no longer exist, so, I'll throw in a starter, the Yew Tree at Malin Bridge, from the top of Dykes Lane - should prove exciting. Entries need not be overly serious, taking out the Freemasons from Crookes Top is quite acceptable :rolleyes: Link to comment Share on other sites More sharing options...
DaveH Posted October 13, 2009 Share Posted October 13, 2009 The SheffieldHistory "Rolling a big Boiler downa Big Hill into a Pub Challenge" is hereby launched. The boiler must be of a standard size and weight, what are the nominations for Pub/Hill please ? Obviously the bigger and steeper the hill the better. This being a history site the Pub need no longer exist, so, I'll throw in a starter, the Yew Tree at Malin Bridge, from the top of Dykes Lane - should prove exciting. Entries need not be overly serious, taking out the Freemasons from Crookes Top is quite acceptable Unfortunately boilers do not come in standard sizes as such. Stuart0742 and SteveHB can remember someone bringing a lorry down Granville Road (a fairly steep hill) in the 1960's, going straight across Granville square roundabout and straight into the boozer on the opposite side (the Montgomery?? not sure of name any more) but unfortunately no boiler involved so I suppose it doesn't count. Link to comment Share on other sites More sharing options...
RichardB Posted October 13, 2009 Author Share Posted October 13, 2009 Unfortunately boilers do not come in standard sizes as such. Stuart0742 and SteveHB can remember someone bringing a lorry down Granville Road (a fairly steep hill) in the 1960's, going straight across Granville square roundabout and straight into the boozer on the opposite side (the Montgomery?? not sure of name any more) but unfortunately no boiler involved so I suppose it doesn't count. It's a standard SheffieldHistory fictional boiler OK, 18 feet long, weighs 2.5 tonnes, black, 17 feet circumference at the thick end, 1.5 feet at the thin end, no rudder, operates at 17,000 PSI (with following wind), five-speed, manual, green, tall, lots of doors, vegan, likes a drink at the weekend, allergic to nuts ... now, lets destroy some non-existant Pubs with a fictional "standard SheffieldHistory boiler". Link to comment Share on other sites More sharing options...
DaveH Posted October 13, 2009 Share Posted October 13, 2009 It's a standard SheffieldHistory fictional boiler OK, 18 feet long, weighs 2.5 tonnes, black, 17 feet circumference at the thick end, 1.5 feet at the thin end, no rudder, operates at 17,000 PSI (with following wind), five-speed, manual, green, tall, lots of doors, vegan, likes a drink at the weekend, allergic to nuts ... now, lets destroy some non-existant Pubs with a fictional "standard SheffieldHistory boiler". With those dimensions (pretty big) and a weight of only 2.5 tons the metal would have to be pretty thin and with that absolutely collosal pressure of 17,000psi (most steam engines work on less than 250psi) it would probably just destroy itself instantly, BANG taking with it any pubs within range of it. Link to comment Share on other sites More sharing options...
SteveHB Posted October 13, 2009 Share Posted October 13, 2009 I have heard many a back boiler rumbling and gurgling, and have also in the past been told stories about some exploding and blowing the chimney breast out. Anyone ever experienced this, or know someone it's happened to, could it all be a tale ? Link to comment Share on other sites More sharing options...
RichardB Posted October 13, 2009 Author Share Posted October 13, 2009 It's a standard SheffieldHistory fictional boiler OK, 18 feet long, weighs 21.5 tonnes, black, 17 feet circumference at the thick end, 1.5 feet at the thin end, stabilisers, operates at 175 brake horse power (with following wind), horse powered, still tall, lots of doors; smells of goats-cheese, Born to be Wild, allergic to ...Turkisk Delight adverts from the late 70's. now, lets destroy some non-existant Pubs with a fictional "standard SheffieldHistory boiler". Adjusted - Not massively knowledgeable about boilers, you may have noticed - just having a laugh. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now