Jump to content
Sign in to follow this  

Westall Richardson Knife

Recommended Posts

Hello, a couple of days ago I my wife was using an old knife to trim up a square Xmas cake she had previously made. It was a big carving knife she had and being “me”, I had to check the blade markings. Picture is below.


My wife said it had been her Grandma’s knife and apparently there had been a steel with it. I checked the “forum” for the company and the only detail I found was the address of the ”Cavendish Works” impressed on the blade, which happens to be on Cavendish Street.

The inter net added

 1839  Richardson was established in Sheffield by Westall Richardson

 1984    Richardson change the company name to Richardson Sheffield Limited

 1986  Richardson Sheffield Ltd is acquired by McPherson's Ltd, an Australian Housewares Company

 2005    Richardson Sheffield become a privately owned company

 2007  The Richardson Sheffield brand joins Amefa a Dutch concern

 2013 1839 range of knives are launched, designed and finished in Sheffield

  Shop opens in Meadowhall Centre 2017

This is mainly the late history of the concern and elsewhere it is suggested that after “Amefa”, stuff was sourced from the far East. Where is the flesh on the top part of the skeleton of this “Westall Richardson”? I did find however, information that gave another address as follows.


  Westall Richardson Ltd. Cavendish Works, Morpeth Street, and Regent Cutlery Works, Upper Allen Street, Sheffield 3.

There must be more “meat” to go with making of this carving knife. I do not want to let the secret out that I left secondary school more than 5 years ago but family history should suggest that the knife was likely to have been made before WW2 and maybe well before. This looks like it was a very good quality item when made and viewing the handle with a lens does not suggest it is of bone but perhaps it is sadly of ivory. Nothing can be done about that now though.

Does “Shear Steel” or “Hand Forged” give any dating?

Hope my photo is of interest and will stimulate some more information.


  • Like 1

Share this post

Link to post
Share on other sites

12th August 1815 - Westall Richardson born in Sheffield, son of Westall (grinder) and Ann

27th September 1818 - William Richardson born in Sheffield, son of Westall (grinder) and Anne

1841 Census - Mr Westall Richardson (born 1815) is a table knife cutler living at Clarance street

1851 Census - William Richardson (born 1818 states in Manchester?) table knife mnanufacturer living at 4 Monmouth street, family includes son Westall Richardson (born 1844)

4th March 1854  -  Cavendish Works Broomspring Lane, for sale due to decease of Thomas Harrison, table knife manufacturer

13th November 1857 - Lost from Cavendish Works, an ass, white with brown spots, Mr Richardson owner

10th February 1866 - William Richardson of Cavendish Works Broomspring Lane fined 14s for allowing dense smoke to be emitted for 21 minutes in the hour from his steam engine furnace

14th January 1869 - Richardson advertsing for a man to make blades for 2 and 3 bladed pocket knives for the American trade

29th November 1869 - Isaiah Stych, engineers tool manufacturer, Cavendish Works, Cavendish street making screw wrenches and Clyburn spanners - note different works with same name, in 1890 William Mitchell making engineers tools there

11th November 1872 - Boy wanted to buff table knives - Westall Richardson, Cavendish Works, Broomhall street

4th September 1875 - Outrage at Cavendish Works Broomhall street, eight whellbands cut into pieces

5th November 1881 - Advert for fork maker includes information that the Cavendish Works Broomhall street is opposite the Fitzwilliam Hotel (ie corner of Fitzwilliam street)

20th November 1884 - Mr Westall Richardson of Cavendish Works plaintiff in a case about delivery and payment of steel

18th October 1890 - Cavendish Works, 60 Broomhall Street to let, a three storey block used as a grinding wheel

22nd April 1892 - Westall Richardson of New Cavendish Works, Sarah Street in court as defendant in false marking case - knives marked London

4th October 1897 - Westall Richardson (Junior born 1844) died at Mulgrave House, 450 Glossop Road, leaving £7164 13s 11d. He had fallen down the Cutlers Hall steps in November 1896 and been knocked unconscious.


Share this post

Link to post
Share on other sites

Thank you Edmund, for adding some early history about this Sheffield “Richardson” cutlery concern. However do we need a spreadsheet for it now though? Too many “Westalls” and “Williams”, and not to mention four or five “Cavendish Works”.

If we accept that the “Cavendish Works” on Cavendish Street was not used by Westall Richardson” we have the following list for Cavendish Works.

1854    Broomspring Lane

1872  Broomhall Street

 1892  Sarah Street ( Google shows this to be in Rotherham)

 1964 Morpeth Street (and Upper Allen Street which seems to be an adjoining street)

Does anyone have any corrections or additions?

I do have 2 other questions from Edmund’s input though. I wonder if the white ass with the brown spots was returned or did November 1857 give a few extra hearty dinners to the locals? Also who would have believed that Environmental Health was so much on the ball in 1866?



Share this post

Link to post
Share on other sites

Sarah Street was off Brook Hill, now underneath the Netherthorpe Road dual carriageway as it comes up the hill to the roundabout.  The Cavendish Works seems to have been a block of premises that Westall Richardsons gradually took over, as in 1893 they had 2 premises (218 Brook Hill and premises on the west side of Sarah Street).  The Lightng Dept photo shows they took over most , if not all of the Brook Hill premises nos. 214 to 220.





Share this post

Link to post
Share on other sites

Thank you Edmund again. Its great! Lost history not lost anymore and available to anyone who cares to search.


Share this post

Link to post
Share on other sites

I used to go to Westall Richardson to service equipment used to put handles onto their cheap range of knives. They had 3 machines with induction coils at about 12 work stations with a girl at each coil heating the tang of the knife and pushing it into plastic handles so it would melt its way in and the plastic would set around the tang. These knives were very cheap with a blade just pressed out of steel strip, and you  would find them hung up for sale in a sealed plastic sheath in every supermarket. Now for the naughty bit. When I became Service Manager I sent a fairly new guy down to Westall's to do a service who was greeted by a girl on the end of the line nudging the girl next to her and declaring loudly "I could f**** him. Our engineer left rapidly and would not go there again. This process ended when Westall's bought a plastic moulding company who had moulded onto a competitors blades automatically. This action closed down their competitor!

I was able to purchase from them a set of their professional range cooking knives pictured below. 

Westall R.jpg

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this