Jump to content

Hard Disk Rip


RichardB

Recommended Posts

Not forced to be the HDD, it could be the laptop.

of course everything is backed up? :blink:

aint it? :blink:

I thought I had problems the other week, turned out to be the sata lead, though that should not be a problem with a laptop

Link to comment
Share on other sites

of course everything is backed up? :blink:

aint it? :blink:

I thought I had problems the other week, turned out to be the sata lead, though that should not be a problem with a laptop

The usual error report is

Boot Device Not Found

Please install an operating system on your hard disk.

Hard Disk - (3F0)

Now that could mean that the hard disc has finally expired

Or it could mean, as Stuart says, that the connecting lead has come adrift.

Worth checking other options before writing the drive off, or even checking it by removing it and connecting it to another computer.

Link to comment
Share on other sites

No data on this drive. I'll try swopover idea; then take another one from the 40 or so in stock at work, I'll ring it in under warranty.

Link to comment
Share on other sites

No data on this drive. I'll try swopover idea; then take another one from the 40 or so in stock at work, I'll ring it in under warranty.

If there is no data on the drive, - no boot sector and no operating system then that is why it isn't working.

It can't boot up if there is nothing to boot to.

Link to comment
Share on other sites

1984-2012 in IT I'd kind of worked that out.

If there is no data on the drive, - no boot sector and no operating system then that is why it isn't working.

It can't boot up if there is nothing to boot to.

Link to comment
Share on other sites

1984-2012 in IT I'd kind of worked that out.

If it's from 1984 and you want to boot it,

Have you got a 3 and a half inch floppy?

Link to comment
Share on other sites

If it's from 1984 and you want to boot it,

Have you got a 3 and a half inch floppy?

If it's from 1984 you would need a five and a quarter inch floppy ! :)

HD

Link to comment
Share on other sites

Possibly 8" soft sectored or hard sectored back then, one of 'em had holes punched into the disk, can't remember which, or even why.... 180Kb if I remember correctly.

If it's from 1984 you would need a five and a quarter inch floppy ! :)

HD

Link to comment
Share on other sites

If it's from 1984 you would need a five and a quarter inch floppy ! :)

HD

Yes, but the expression "three and a half inch floppy" was being used as an innuendo to belittle Richard and get a few cheap laughs. lol

Link to comment
Share on other sites

Yes, but the expression "three and a half inch floppy" was being used as an innuendo to belittle Richard and get a few cheap laughs. lol

Little Richard ! :huh:

A wop bop a loo bop, a wop bam boom!

Link to comment
Share on other sites

If it's from 1984 you would need a five and a quarter inch floppy ! :)

HD

The first proper IBM PC's I worked on were a couple of IBM "Portable" PC's which had an Intel 8088 processor running at the fantastic speed of 4.77 (four point seven seven) Mhz.

They were model PC5155 / 68 and had 256k of RAM. They had two 5.25 " floppys on the right side and about an 8 inch orange monochrome display to the left. They weighed about 15 kg but had a fold-down keyboard and a handle which folded across the front.

They ran PCDOS v2.10.

We thought they were the bees knees at the time (1984).

I also worked on an ASEA robot which had a 4 bit Intel processor (4004).

HD

Link to comment
Share on other sites

Guest CHOOTTWEAST

Its my first time to post on this forum,just wannat make some friends here.if its not allowed to post on this board,please delete this thread.Nice to see you guys here.:)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...